Ankom xt10i automatic fat analyzer
Efficient solvent recovery (more than 90%); hand off work, no need to be guarded; maximum daily (8 hours) processing capacity: 100
¥ 312000.00
Service hotline：0816-2277909
Product details
Ankom xt10i automatic fat analyzer
Product features
1. The principle of Soxhlet extraction was followed
2. Analysis of high fat / oil dry samples
3. Up to 15 samples can be determined at a time
4. Microcomputer automatic control
5. Efficient solvent recovery (over 90%)
6. Very safe alloy steel sealed extraction chamber
7. There is no need for auxiliary operation in the fume hood
8. Take off the job without special guard
High accuracy and precision due to the adoption of the advanced filter bag technology of ankom, the automatic fat extraction and automatic solvent recovery, many factors affecting the accuracy and precision of the analysis results can be eliminated, thus ensuring the accuracy of ± 0.5%.
Ankom fat analyzer has high efficiency and low cost. It doesn't need the special guard of the operator. It only takes 30-120 minutes to complete the whole set of work from heating extraction to recycling. Skilled operators, ankom XT 10I fat analyzer can easily determine up to 120 samples a day, and the working efficiency is greatly improved. At the same time, ankom filter bag technology can ensure high repetition accuracy, reduce the repeated determination due to the large variation of parallel measurement results in the traditional way, thus greatly reducing the analysis cost.
Due to the use of automatic intelligent condensation circulation system, when the heating temperature is higher than 90 ℃, the condensation system will automatically intervene and fall back to the working temperature; on the contrary, when the temperature is lower than 90 ℃, the condensation system will automatically shut down, and the heating system of the instrument will work immediately, the temperature control accuracy is ± 0.1 ℃, and there is 105 ℃ over temperature shutdown protection. Ankom fat analyzer is a closed circulation system, and has ultra micro tail gas adsorption device (activated carbon), so it can avoid the harm of manual direct contact with thermochemical solvents and harmful gases. It can be carried out in conventional laboratory without the necessary "fume hood" of traditional fat analysis laboratory. The whole analysis process is very safe.
High degree of automation, programmable computer control drive device to complete the automatic operation of the whole process of sample extraction, including automatic fat extraction, automatic solvent recovery rate of more than 90% and automatic condensation circulating water intervention, and short-time notification after work. The whole analysis process realizes intelligent automation.
The analysis results are accurate. A large number of comparative analysis data carried out in many famous laboratories in the world show that the filter bag technology is suitable for all kinds of sample testing specified by AOCS (American Society of Oil Chemists), and its analysis results are consistent with the results of traditional methods (including GB method in China), and the correlation coefficient between the filter bag technology and the analysis results of traditional methods is more than 0.999.
Product parameters
Bag structure | Three dimensional structure of 3 μ m pore |
Sample size / bag | 1.0～3.0 g |
Fat / grease measurement range | 0%～100% |
Sample batch processing capacity | 1～15 |
Time consumption for each measurement | 30-60 min (low fat content) 60-120 min (high fat content)肪） |
Daily capacity (8 hours of work) | Up to 100 |
Standard deviation of results | ≤±0.5% |
Repeatability accuracy | ≤±0.5% |
Degree of automation | Automatic extraction |
Solvent recovery | 90%, automatic solvent recovery and recycling |
working temperature | 90℃ |
temperature control | Intelligent circulating water intervention |
Treatment temperature range | Room temperature ～ 90 ℃ |
Security | Closed environment, hands off work |
Main materials | The whole machine is made of stainless steel and the reaction cylinder is made of thickened stainless steel, which is resistant to high temperature and high pressure化学腐蚀 |
