No need for special guards by operators, from heating to recycling, it only takes 30 to 120 minutes to complete a complete set of work alone
¥ 380000.00
Service hotline：0816-2277909
Product details
1. Follow the analysis principle of Soxhlet extraction method
2. It can analyze high content fat/oil dry samples
3. Up to 15 samples can be measured each time
4. Microcomputer automatic control
5. Efficient solvent recovery (over 97%) and automatic recycling
6. Safe alloy steel sealed extraction chamber
7. No need to operate in a fume hood
8. Work off hands without special guards
9. Maximum daily (8 hours) processing capacity: 120
High accuracy and precision. Thanks to the use of ANKOM’s advanced American filter bag technology, as well as automatic fat extraction, solvent recovery and recycling systems, many factors that affect the accuracy and precision of the analysis results can be eliminated, thus ensuring Improved our ±0.5% analysis accuracy.
High efficiency and low cost The fat analyzer of ANKOM fat analyzer is more cost-effective. It does not require special guards by operators, and it only takes 30 to 120 minutes to complete a complete set of work from heating to recovery. Skilled operators can use the ANKOM XT15i fat analyzer to measure up to 150 samples a day, greatly improving work efficiency. At the same time, the ANKOM filter bag technology can ensure high repeatability, reducing the number of repeated determinations in the traditional way due to the large variation of parallel determination results, thereby greatly reducing the cost of use.
Good safety performance. Due to the fully automatic intelligent condensing circulation system, when the heating temperature is higher than 90℃, the condensing system will automatically intervene and fall back to the working temperature; on the contrary, when the temperature is lower than 90℃, the condensing system will automatically shut down. The heating system of the instrument works immediately, the temperature control accuracy is ±0.1℃, and it has 105℃ over-temperature shutdown protection. The ANKOM fat analyzer is a closed circulatory system and has an ultra-micro exhaust gas adsorption device (activated carbon), so it avoids the hazards of direct manual contact with thermal chemical solvents and harmful gases, and does not require the "fume hood" necessary for traditional fat analysis laboratories It can be carried out in a routine laboratory, and the entire analysis process is very safe.
High degree of automation Programmable computer-controlled drive device completes the automatic operation of the whole process of sample extraction, including automatic fat extraction, automatic solvent recovery of more than 97%, automatic recirculation and automatic condensed circulating water intervention, short-time notification of work completion . The whole analysis process is very smart and safe.
Accurate analysis results. A large number of comparative analysis data conducted by many famous laboratories in the world show that the filter bag technology is suitable for various sample tests specified by AOCS (American Society of Oleochemists), and its analysis results can be compared with traditional methods (including my country’s GB Method) The results are consistent, and the correlation coefficient with the analysis results of traditional methods is above 0.999.
